8 Pack Rubber Case Feet + 2 Set (20pcs) Repair Replacement Screws Set + One Phillips Screwdriver Compatible with MacBook Pro for A1278 A1286 A1297, 2009 2010 2011 and 2012 Version

I bought an old mid 2012 13" Macbook Pro that was missing it's feet and few of the case screws, this set worked great to replace those items and make it look great again. The screwdriver is nice, but it's not hardened steel or anything, so you won't be getting tons of life out of it, but it's great that it comes with anything like that at all, so I'm not complaining. Good set, so far they have been working great.

The replacement pads fit perfectly into my 2011 MacBook 17 inch laptop. The original ones had torn off and I thought I could do without em, but realized after a few months that dust can get in. These really did the trick. Also comes with screws, a screwdriver, a brush, and another set of pads. What a great deal for the price. I don't know why people are complaining that the screwdriver doesn't fit the screws. It fit exactly and tightened my screws perfectly. 5 stars and I'm very pleased.

I've done quite a few upgrades to my Late 2011 15-inch MacBook Pro over the years, including upgrading the RAM, replacing the hard drive with an SSD, and installing a new battery. This is by far the easiest upgrade to do, and it's very useful.When the original rubber feet fall off, it leaves an open hole in the bottom of the case that allows dirt and dust to enter. This can have major consequences depending on how you use your computer and when, if ever, you open it up to clean it.These rubber feet are very easy to install. For mine, I took the bottom of the case off, cleaned with rubbing alcohol, pressed the new feet on and replaced the bottom of the case. But if that seems like too much work, you really don't even need to take off the bottom of the case. Just make sure the surface is clean and free from any of the old adhesive and press the new pieces on.And if that wasn't enough, this kit comes with two sets of high quality screws. It had never occurred to me to replace the original screws, but after 10+ times of opening up the bottom of the case, the originals had started to strip out slightly. Not a big deal at the moment, but could be a problem in the future. The new screws come pre-greased and were easy to install. Even with some pressure, they showed no signs of deforming.

The feet were just the right size and adhesive was great. i was already missing screws so i replaced all and it worked great , cleaned out bottom with brush provided which was a nice touch . now my mac book doesn't slide around. Screw driver was correct size and made sure i took time and not strip anything , i read in some reviews it was a different screw but all mine were correct and right size, no issues . Hope this helps just check screws before purchase and model number as well

These were easy to install and seem to be pretty good quality, but the tools that came with it not so much. The plastic is very cheap and has sharp edges, but you get what you pay for. Over all I'm happy with my purchase.

This is an awesome kit to give your Macbook Pro a little refresh. AND IT'S ONLY SIX DOLLARS. I thought they'd be cheap parts, but I'm very satisfied...My girlfriend and I both got Macbook Pro's this week with either missing or worn rubber feet. Mine was also missing two bottom screws so now we both have new screws for the bottom cover and new rubber feet. Yes, you read that right; for $6 we both have all-new screws and rubber feet.I will say the feet aren't super easy to install (which doesn't reflect this product, but the design of the feet for the computer itself). I didn't have any real issues, but there were a few where I couldn't get them lined up perfectly with the little hole outside of the main, big hole. I just left them to prevent wearing down the adhesive. If they fall off then I can always buy another set and try again. My error...The feet stay on either way. To be safe, I actually popped off the bottom cover and used a soldering iron to "seal" the rubber going into the Macbook Pro hole. They seemed solid, but now I know they aren't going anywhere until I want them off.If you're looking for rubber feet for your Macbook just buy these! They're inexpensive, REAL rubber (they don't slide around like others I've read about), and they include new screws/tools. I feel like I should've paid more than $6, but I'm not complaining :)

I had put off ordering these...it just didn’t seem important. I had to get a new battery anyway, so went ahead and ordered these as well. They actually reminded me that the Apple laptop cooling system leaves a bit to be desired anyway, but without feet, it simply cannot circulate the air across the bottom. So don’t do what I did and delay. They are so cheap, but important to keep your MacBook Pro working properly. Quick shipping and very well priced. These are the second set of replacement feet I have gotten from this company...not bad for a 9 year old laptop. Show me a Windows laptop that is still worth keeping after 5 years, nevertheless 9. I added some memory and replaced the battery twice. Not a bad deal at all.

I bought a refurbished Mac and got a great deal on it because it didn't have any of these "feet"!I got these immediately--super cheap, easy to put on, and now I feel like my "used" Mac is almost "new" for a fraction of the cost! Worked GREAT!

Great product. The screws fit perfectly and come pre-surfaced with blue lock-tite. That is a nice touch! My only complaint is that the rubber feet are not the same thickness or quality as Apple OEM, but they'll likely do the trick and I have a second set if they wear pre-maturely. Would buy again.

Llevaba tiempo buscando unas patas de goma para mi Macbook Pro Late 2011 modelo A1278 que fueran de calidad y a buen precio y las he encontrado. Aparte los tornillos quedaron a la perfección y con mejor agarre que los originales. Se agradece mucho que incluyan el destornillador.Para colocar las patitas únicamente hay que quitar los restos de las anteriores, limpiar muy bien la superficie de la tapa donde estaba el pegamento, luego despegar las nuevas del plástico, alinearlas y colocarlas presionando un poco hasta que se sienta un clic y listo.Pros:-Las patitas parecen originales en cuanto al material (yo diría que un poco mejores).-Son muy fáciles de colocar.-Antideslizantes.-Son dos juegos de patas y dos de tornillos.Contras:-No son perfectas, la circunferencia de las patitas es mínimamente irregular por lo que si te acercas mucho te darás cuenta que no cubre a la perfección en la circunferencia de la tapa (es un detalle mínimo que no afecta su uso, es meramente estético).Es todo lo que tengo que decir de este producto, son muy buenas y valen mucho la pena para no seguir dañando la tapa de la Macbook Pro.

This item was shipped and delivered the next day. it is excellent quality and great price. It also comes with cohesive under the rubber footer, just peel and stick on (no super glue or anything needed). It is the exact match to the original rubber footer, there is only one original in the picture are you able to tell the difference?

Replaced screws and pads for a MBP 2011 and 2012, screws and pads fit perfect. For some reason, found screwdriver to be too big for replacement screws 🧐 thankfully have a ton of computer screwdrivers so I was able to use one of those. Heads up, maybe I was just unlucky or something

Me gustó mucho esta herramienta, me fue muy útil a la hora de abrir mi laptop mac y poder reemplazar algunos tornillos que había perdido.Sería bueno que tuviera un empaque especial ya que son elementos muy pequeños que son fáciles de perder y deberían estar en un empaque fácil de guardar. De resto todo funcionó muy bien