Style:Ramps 1.6 Plus Highlights: By using the SPI mode, it is only necessary to perform a simple plug-in operation on the jumper cap, which effectively avoids the problem that the motor does not work due to the wrong line insertion, and also prevents the drive from not working and other issues due to poor contact of the external line during the printing process Tips: 1. Drive mode selection to determine the firmware to be burned, and pay attention to the consistency of the subdivision 2. When using a hot bed with a power greater than 140w, be sure to install the MOS tube heat sink to prevent the mos tube from overheating. When using a hot bed with a power greater than 180w, be sure to select the hot bed MOS module for transfer. Long-term overheating causes the board to be burned 3. When plugging and unplugging the drive to the Ramps1.6+, pay attention to the direction of the drive, never insert it, prevent the drive from being burned, and the operation of the plug drive must be performed under the premise of power failure. We do not bear the loss and consequences of this type of drive and motherboard being burned due to driver insertion errors. Package Contents:1x Ramps 1.6 plus1x heat sinkNOTE: If you find any problem, please contact us at first, and our technical staff will help you to solve the problem at once. Thanks!
S**J
Works, but isn't great
I've been using this for awhile now and it's needed some babying along the way. I have needed to fix 2 capacitors and solder header pins back down, but after those fixes it's been fine. If you aren't scared of the potential of needing to do minor fixes yourself, it's a good board.
G**Y
Flux Residue
It's evident that Kingprint is hand soldering the these boards. They might consider using no-clean flux or adding a board wash step in to their process flow. There was quite a bit of flux residue on the board I received. But, for the price, I'm not going to complain too loudly.
Trustpilot
1 month ago
5 days ago
