Ayotu 2 Pack 16ft/5m Charge Cable for Ring Stick Up Cam Battery/Plug-in 3rd Gen/2nd Gen, Power Adapter Continuous Charging with Weatherproof Cord(NO Camera), White

So far so good! The plugs work as long as you have the battery inserted. The cameras stay charged at 100%. I tried using the plugs without the batteries and they didn't work.

These cables worked perfectly and allowed me to return new camera as they were no longer needed. 10/10

Very good product and cheaper then other seller.

The outdoor/indoor power adapter for Ring Stick Up Cam looks & feel very well made, however 1 had to deduct 1 star because I don't think this adapter plug will completely seal out water out of the power input hole. As you can see from the picture there's a slight gap and it wiggles a little.... The OEM version is super snug. But since I won't be using this outside, this adapter is fine with me, it's plenty long, well made.

Lucked out with the location of studs, ran the wire through the wall! Now we wait to see if it keeps the battery charged.**UPDATE - after a couple of minutes of trial and error, everything works. When you first plug it in, Ring doesn’t recognize it. If you go to device health in the app, beside “solar status” it either says “connected” or “not connected”. Remember, this is not a Ring accessory, so when it is plugged in and working, your cam thinks it is a solar accessory. You will see a green battery icon with what looks like rays shooting up, that means it’s connected. When it is charging, there will also be a lightning bolt inside the battery icon. If it doesn’t do this, press hard on the connector, and I had to remove the battery for a few seconds, then reinstall it. I also had to un plug the adapter and plug back in (easier to unplug the USB end). After another check in device health, everything is good and batteries read 100%.

I bought it not knowing if it was going to work on my RING cameras (3rd generation) its been working great, it thinks that it's been changed by a solar panel from Ring. It's keep the battery changed with a 1amp charge.

Great product, no compatibility issues with ring stick-up cameras. Seller provided clear information about which Ring models worded with charge cable.

If you are looking at this product because you don't want to pay $40 for EACH official adapter there is something you should know...Using these adapters will keep your batteries charged but you will not be able to be in Wired Mode officially in the Ring app. The device recognizes this adapter as a "solar" charger unlike the OEM adapter. I'm not sure if this is due to the 30ft cord and accompanying voltage drop or some sort of verifying chip like Apple's MFi in the charging brick/cable.I will admit I was a bit disappointed in this product at first as I did not know about this issue but in the end the product does what it is advertised to do - keep the battery in your Ring Stickup Battery Cam Gen 3 charged.