SMART PROFILE 3D Wall Panels - 38.6" x 19.6" Wall Panels for Room Decor - Easy DIY Installation Wall Decor Aesthetic Design Accent Wall Panels for Living Room Kitchen Bedroom Office - Slate Dark Gray

UPDATE February 16m 2924:After finally being able to reach the seller BINITEC of the second order I placed, it was determined that (for unknown reasons) my original order was placed with "BINTEC" (missing the middle "I") and it appears the original supplier (without the middle letter 'I" in the name) has disappeared from Amazon. The default "buy again" button takes you directly to BINITEC and their product is NOT the same as what I ordered from Bintec. Its all very weird.Suffice it to say, the kind folks at BINITEC have been wonderful about helping me sort this issue out and it was they, in fact, who after looking at my invoices realized the now missing seller (bintec) and this fully explains why the products didn't match.I will be refunded for the wrong product purchased due to the redirect at the "buy it again" button on Amazon and have found a completely new supplier that I HOPE is going to send the correct matching product. That said.... BINITEC out of Clearwater Florida has been a fantastic help in sorting this out even though I am returning their product and not purchasing another from them (because it doesn't match what I already have). I highly recommend these folks to all if they have what you are looking for.**********************************UPDATE February 14, 2024:Holy cow paddies!!! Since placing my original order and installing all of the pieces, I found myself short and needed to order another. It arrived on February 3 and today I was going to finish my wall but that's not going to happen. The panels were cheap and flimsy to begin with but look nice once installed despite the crappy weird obvious "lines" between panels but this reordered package surpasses even those issues as the quality of the new panels are even more cheap and flimsy than the original, the color between the stones is different and they are a different SIZE so nothing matches up!!!! What a mess!!! I'm in the middle of a wall! What am I supposed to do now??? I've written to the manufacturer to see what they say and will update when I get an answer.... IF I get an answer. I am beside myself and extremely disappointed. I do NOT recommend this product at all.********************************While they look good once installed, I find there is a lot of trim work to be done to each and every panel and that the seams (top and bottom) are much wider and stick out like a sore thumb on the wall. So, those had to be trimmed too and now there are gaps between the panels where I tried to overlap the bottom and top edges. Still trying to figure out how to fix that.

First. OMG! I couldn't possibly love this more.When it first came in I was super skeptical. I knew it said thin, and it was a glue on. When I saw it, felt it, I was so worried it would look cheap and just horrible. I came home to find my wonderful husband working on the bathroom and I was in complete shock. It was so beautiful. I cannot express how awesome this looks and the wow factor it has. We used clear gorilla adhesive to apply to the wall. The only issue I have is the back. It is great for applying to uneven walls, just as the description says, and the reason is because this had a 3D style cut, meaning the back is not flat, there's not really a backing so to speak, and it is difficult to apply glue. You have to apply glue on the seam area, top and bottom and if there is an even strip somewhere in the middle that is raised evenly with the outer seams. If not, and you apply glue on the inner backing of this, you'll have to literally press in the "brick" shape to the wall, which will probably show and look like you have smashed "bricks" dead give away that it's fake. Other than that part, I have zero complaints at this time. I just hope it holds up to the bathroom environment, especially due to how little the area is that you have to apply the glue. We went with a darker paint color on the walls for contrast and will be lightening up the floors next. I have so many other ideas now for using this kind of material thru out the house.

I installed with double sided sticky tabs as these may need to come down in the future. You must spend the time trimming edges for them to fit together nicely and no show clear (fake looking) lines. Cuts super easy with scissors or razor blade, super light so easy to hang. My only complaint is the are a little pricey for cheap plastic pieces.

Cheap, flimsy and not anything I would put on my walls. Total waste of money!!

UPDATE: one year later and still looks as good as day one. No cracks or holes and still has a strong bond to the ceramic tiles with the Gorilla Glue Max Construction adhesive.I love, love , love this product.JUNE 23, 2023 I am a DIY person with little or no help and it was very easy for me to install. It is textured like stone but thin and easy to cut. Also, very easy to clean. The guy who refinished my tub took a second look and had to feel it and ask what it was made of. He was impressed. I used the Gorilla Glue Max Construction Adhesive it called for and installed directly over old broken ugly ceramic tiles on the wall with no issues.

We had always wanted some stone around our fireplace and found this on Amazon. I was a little nervous when I saw how thin the product was however I must say that I’m very pleased with how it turned out. I found that it was easier to staple it to the wall rather than use adhesive. I put the staples in the grout lines. I then took a black sharpie to blend in the staples. They still shine a little so I’m planning on touching up with some black paint. One piece of advice I would give is to trim one side of the panels so it overlaps correctly. If you don’t you will have a double wide grout joint and your seams will be very apparent. Also, stager your joints. I also installed every other row upside down so there would be no repeated pattern.

The media could not be loaded. I used it on a fake fireplace i ammaking for our new house that isn’t done being built yet. (jensen the piles up crap in our front room). This was so easy to work with and bend. It cuts really easily also. I used Gorilla glue and a few staples. most of the staples are hidden under where the next panel lays on top of the previous one. I plan to use some black caulk to cover up some spots that apparently only i can notice. 😂 Honestly the staples that are showing are super hard to spot. I just know where they are and it bothers me.Tip: if you are bending it around a corner, make sure the glue is dry on the first side or secured with a nail or staple before bending it or the side you just glued will lift up slightly.Overall i highly recommend.

Great 3d effect, looks real! Easy enough to put up, except the 2 types of strong adhesive I used didn't work so I had to nail it, but because it's grey, you can't see them.

Easy to install and great looking...would recommend with no worries. You will need "no more nails glue" for a better job