FPF Fuel Pump for Suzuki Outboard DF100, DF115, DF140, DF200, DF225, DF250, DF90 Replace # 15200-90J00, 15200-93J01

I have a 2005 Suzuki DF115 outboard four stroke engine. Old fuel pump failed. When you turn on the key you should hear it run for 3 seconds and there was no noise. I bought a new high pressure fuel pump from Quantum Fuel Systems (QFS) and installed it and it made a weak noise for 3 seconds when the key was on but the boat would not start. I spent a lot of time and money replacing everything else in the fuel system and it still would not start (without spraying fuel in the intake). Finally, I bought this FPF Fuel Pump and installed it and engine started immediately! Also, when key is on the FPF Fuel Pump runs and sounds 10 times stronger than the QFS. QFS did immediately refund my money, but the time and loss of use of the boat and incredible frustration makes me never want to buy anything from QFS. P.S. If you get the 4-2 code, it is not the flywheel position sensor, for me it was the fuel pump. Once the engine runs for about 30 seconds the code goes away. Also, clean the fuel injectors by taking them out and soaking them in fuel injector cleaner. This stopped the engine surging. And NEVER use ethanol fuel in this engine. Happy Boating!

Installed this FPF pump on a Suzuki 2005 df250. With boat on trailer at boat ramp, I tested fuel pressure non-start and it topped out at 38psi and when motor was started and advanced to wot it dropped to 20psi. I brought with me a used oem hp pump that I have for a spare, installed it, then retested non-start and fuel psi topped out at 40psi, then started engine and advanced to wot and the fuel pressure dropped to 38psi and now the motor is running great. In 2019 I installed a AXIOM brand hp fuel pump on my port motor and it is still working great and pump was 10.00 cheaper. My Mobil mechanic isn’t cheap and I lost more than just cost of defective pump but lots of time too. I was out of the return window for FPF pump and my next order will be a AXIOM brand hp pump.

It’s perfect motors running like brand new aging

hope it holds up , time will tell

Perfect fit and quickly corrected the issues with my DF140. Thank you for fast delivery and a solid product!

Old pumps were from the same manufacturer.One of the terminals on the old pump started spinning freely trying to take wiring off and must have damaged internally. It worked until that happen so decided to stay with same.

If you are rebuilding a VST, it’s well worth your time to get an OEM part. Think of the investment you’re making. I purchased this and it worked fine for about 2-3 hours. Boat started bogging at 2300 rpm after that. I checked my rail pressure and had 26 psi (norm is 36). I tested the old pump, which had been sitting in my shed for ten months, and it ripped 70 psi with a full 12V. DO THE RIGHT THING! Or you will pay in another way…

Perfect fit. 140 HP engine runs great now